Penge · SE20
Amica fridge freezer repairs in Penge
Amica fridge freezer not working properly? We repair Amica fridge freezers in homes across Penge and the SE20 area.

About Amica fridge freezers
Amica is a Polish appliance maker, known for good-value freestanding fridges, freezers and dishwashers.
Finding your model number
When you book, give us the model and serial number on the rating label. On a fridge freezer, look inside the fridge on a side wall, or behind the salad drawer.
Repairs in Penge
We visit Amica owners all over Penge, around Penge High Street, Royal Parade and Betts Park. Terraced streets off the High Street, where washing machines are often fitted under the worktop in compact kitchens.
Amica fridge freezer faults we fix
- Alarm sounding. Check the doors, then let us know the temperatures shown.
- Door won't close. Worn hinges and door seals, or a sagging door, stop it closing properly.
- Ice build-up in freezer. A failed defrost heater, sensor or timer lets ice block the evaporator.
- Water in fridge or on the floor. Blocked defrost drains are the most common cause.
- Fridge warm, freezer cold. A blocked air duct, iced-up fan or failed damper stops cold air reaching the fridge.
Safety first
If either compartment has warmed up, move food somewhere cold and follow food safety guidance on what to keep.
Helpful guides
Questions customers ask
Are you a Amica authorised repairer?
No. We’re an independent repairer, so we can work on Amica and every other major brand. If your fridge freezer is still under the manufacturer’s guarantee, contact Amica first.
What do I need for a Amica fridge freezer repair?
The full model details (the model and serial number on the rating label), the fault and any error code, and your postcode in Penge.
Why is my fridge warm but the freezer still cold?
Usually ice blocking the fan or air channel, or a failed defrost part. These are often repairable.
Other fridge freezer brands in Penge
More Amica repairs in Penge
Amica fridge freezer repairs in other areas
Book your repair
Tell us the make, model and what it’s doing. We’ll explain the next step and the cost before any work starts.