Penge · SE20
Amica dishwasher repairs in Penge
Independent Amica dishwasher repairs in Penge, SE20. Tell us the model and fault and we’ll arrange an engineer visit Monday to Thursday.

About Amica dishwashers
Amica is a Polish appliance maker, known for good-value freestanding fridges, freezers and dishwashers.
Finding your model number
When you book, give us the model and serial number on the rating label. On a dishwasher, look on the side edge of the inner door, visible when you open it.
Repairs in Penge
Penge is in the London Borough of Bromley, and we cover the whole SE20 area as well as Anerley, Beckenham, Sydenham.
Amica dishwasher faults we fix
- Door won't close or drops open. Broken door springs or hinge cables cause the door to fall or refuse to latch.
- Leaking. Door seals, the base tray, hoses and pump seals are the common leak points.
- Water warning or tap symbol. This usually means water is not coming in: check the tap and hose first.
- Error codes. Note the code exactly; it narrows down the fault a great deal.
- Not cleaning properly. Blocked spray arms, a weak circulation pump or a heater fault leave residue and grit on dishes.
Safety first
Turn the dishwasher off at the isolator if water is leaking near electrics, it trips the power or you smell burning.
Helpful guides
Questions customers ask
Are you a Amica authorised repairer?
No. We’re an independent repairer, so we can work on Amica and every other major brand. If your dishwasher is still under the manufacturer’s guarantee, contact Amica first.
What do I need for a Amica dishwasher repair?
The full model details (the model and serial number on the rating label), the fault and any error code, and your postcode in Penge.
Why is there water in the bottom of my dishwasher?
A small amount around the filter is normal on some models. A pool covering the base usually means a blocked filter, sump or drain pump.
Other dishwasher brands in Penge
More Amica repairs in Penge
Amica dishwasher repairs in other areas
Book your repair
Tell us the make, model and what it’s doing. We’ll explain the next step and the cost before any work starts.