Family business established 1984 · Independent appliance repairsEngineer visits Monday to Thursday

Electric hobs · Crystal Palace

Electric hob repairs in Crystal Palace

Induction, ceramic and solid-plate hobs repaired across Crystal Palace and nearby, whether a zone won't heat, the controls won't respond or an error code keeps flashing.

Electric hob in a kitchen

Ceramic hobs use radiant elements under the glass, while induction hobs heat the pan directly with a magnetic field. Solid-plate hobs use cast iron plates with their own elements.

Each type fails differently. Touch-control hobs often show an error code or child lock symbol that tells us a great deal, so note exactly what the display shows.

Common electric hob faults we fix

One zone not heating

Ceramic elements, induction coils and their power boards can fail one zone at a time.

Touch controls not responding

Child locks, moisture on the glass or a failed touch board stop the controls.

Error code flashing

Induction hobs report overheating, supply and board faults with codes.

Hob trips the power

A component leaking to earth needs testing before the hob is used again.

Pan not detected

Induction needs magnetic pans of the right size. If good pans aren't detected, the coil or board needs testing.

Zone stays on

A switch or board stuck on is a safety risk. Isolate the hob and call us.

Cracked glass

Never use a cracked hob. Replacement glass is available for many models.

Buzzing or clicking

Some noise is normal on induction, but loud buzzing with poor heating can mean a fault.

Hob turns itself off

Overheat protection or a cooling fan fault can switch zones off early.

Residual heat light stays on

A sensor or board fault can leave warning lights on when the hob is cold.

Quick checks before you call

  • Check the child lock is not switched on (often a key symbol held for a few seconds).
  • Wipe the glass dry, since water or spills on the touch controls confuse them.
  • On induction, test with a pan that a fridge magnet sticks to firmly.
  • Check the hob's breaker or isolator has not tripped.

When to stop using it

Do not use the hob if the glass is cracked or a zone will not switch off. Turn it off at the isolator.

Where to find the model number

On the underside of the hob and on the warranty card or manual; we can often read it from the hob once it is lifted.

Electric hob brands we repair

Electric hob repairs near Crystal Palace

Electric hob fault guides

All electric hob guides

Questions customers ask

Can you repair induction hobs?

Yes. Induction power boards and coils are repairable on many models.

My hob shows a key or lock symbol: is it broken?

That's usually the child lock. Hold the lock button for a few seconds to release it.

Do you repair gas hobs?

We work on electric, ceramic and induction hobs only. Gas hobs need a Gas Safe registered engineer.

How do I find my hob model number?

It is on a label under the hob and usually on the manual or receipt. If you can't find it, a photo of the controls helps.

Book your repair

Tell us the make, model and what it’s doing. We’ll explain the next step and the cost before any work starts.

CallBookFault help