Family business established 1984 · Independent appliance repairsEngineer visits Monday to Thursday

Washing machines · Crystal Palace

Washing machine repairs in Crystal Palace

Washing machine stopped mid-cycle, refusing to drain or shaking across the floor? We repair front-loading washing machines from every major brand in homes across Crystal Palace and the surrounding SE postcodes.

Washing machine in a kitchen

Most washing machine breakdowns come down to a small number of parts: the drain pump, door lock, heating element, carbon brushes or motor, drum bearings and the main control board. Our engineer tests each one in your kitchen rather than guessing, then explains what has failed and what it costs to put right before any work starts.

If the machine is old or the repair would cost more than it is worth, we say so. Plenty of machines are worth saving, though: a failed pump or door lock is usually a single-visit job.

Common washing machine faults we fix

Won't drain

Water left in the drum usually points to a blocked filter, a kinked hose or a drain pump that has stopped turning.

Won't spin

A load that stays soaking wet can be an unbalanced load, a drainage problem or worn motor brushes.

Door won't open or lock

The door interlock protects you from a full drum. When it fails the programme will not start or will not release.

Leaking water

Leaks come from door seals, detergent drawers, hoses, pumps and sump hoses. Where the puddle appears tells us a lot.

Loud banging or grinding

Banging on spin often means worn drum bearings, broken suspension or a loose counterweight.

Not heating

Cold washes and poor stain removal usually trace back to the heating element or temperature sensor.

Error codes

A flashing code is the machine's own diagnosis. Note it down exactly before you switch off.

Drum won't turn

A slipped drive belt, worn brushes or a motor fault can stop the drum moving.

Trips the electrics

A machine that trips the RCD needs testing for an earth leakage, often from a heater or a wet component.

Smells or stays damp

Persistent odours can come from a blocked sump, a dirty drawer housing or a pump that never fully empties.

Quick checks before you call

  • Make sure the tap behind the machine is fully open and the inlet hose is not squashed.
  • Clean the drain filter (usually behind a small flap at the bottom front) with a towel and tray ready.
  • Check the load is not one heavy item, which can stop the machine spinning.
  • Write down any error code and the programme you were using.

When to stop using it

Switch off and unplug if you smell burning, see water near the plug or socket, or the machine trips your electrics.

Where to find the model number

On the inside of the door frame, around the porthole, or on the back panel.

Washing machine brands we repair

Washing machine repairs near Crystal Palace

Washing machine fault guides

All washing machine guides

Questions customers ask

How quickly can you come out?

Engineer visits are Monday to Thursday. Call 0208 462 2111 and we will give you the first available slot for your postcode.

Is it worth repairing an older washing machine?

Often, yes. A pump, door lock or element repair costs far less than a new machine. If bearings or the main board have failed on an older model, we will tell you honestly if replacement makes more sense.

Do you repair integrated washing machines?

Yes. Built-in machines behind a kitchen door are common around Crystal Palace. Let us know when booking so we allow time to slide it out safely.

Can I keep using it with a leak?

No. Turn it off at the wall and close the water tap until it has been checked.

Book your repair

Tell us the make, model and what it’s doing. We’ll explain the next step and the cost before any work starts.

CallBookFault help