Penge · SE20
Sharp fridge repairs in Penge
From light out but cooling to ice on the back wall, we fix Sharp fridges for customers in Penge and nearby.

About Sharp fridges
Sharp is a Japanese electronics brand, known for fridge freezers, dishwashers and microwaves.
Finding your model number
When you book, give us the model and serial number on the rating label. On a fridge, look inside the fridge on a side wall, often behind or above the salad drawers.
Repairs in Penge
Our engineers regularly work in Penge and nearby Anerley, Beckenham, Sydenham. Terraced streets off the High Street, where washing machines are often fitted under the worktop in compact kitchens.
Sharp fridge faults we fix
- Light out but cooling. The bulb or LED module may have failed, or the door switch is stuck.
- Ice on the back wall. Some ice on the back panel is normal, but a thick sheet points to a defrost problem.
- Not working at all. Check the socket first; control board and relay faults stop the compressor starting.
- Not cold enough. Thermostats, fans and a blocked defrost drain are common causes before the sealed system is suspected.
- Water on the floor. The drain hose or evaporation tray at the back may be displaced or cracked.
Safety first
If the fridge is warmer than 8°C, move food you need to keep to another fridge or a cool box, and decide what to discard following food safety guidance.
Helpful guides
Questions customers ask
Are you a Sharp authorised repairer?
No. We’re an independent repairer, so we can work on Sharp and every other major brand. If your fridge is still under the manufacturer’s guarantee, contact Sharp first.
What do I need for a Sharp fridge repair?
The full model details (the model and serial number on the rating label), the fault and any error code, and your postcode in Penge.
Why is water collecting in my fridge?
The defrost drain hole at the back is usually blocked. Clearing it often solves the problem.
Other fridge brands in Penge
More Sharp repairs in Penge
Sharp fridge repairs in other areas
Book your repair
Tell us the make, model and what it’s doing. We’ll explain the next step and the cost before any work starts.