Penge · SE20
Lamona fridge repairs in Penge
Independent Lamona fridge repairs in Penge, SE20. Tell us the model and fault and we’ll arrange an engineer visit Monday to Thursday.

About Lamona fridges
Lamona is a Howdens' own kitchen appliance brand, known for built-in ovens, hobs, dishwashers and fridge freezers fitted with Howdens kitchens.
Finding your model number
When you book, give us the Lamona model code (often starting LAM) and serial number. On a fridge, look inside the fridge on a side wall, often behind or above the salad drawers.
Repairs in Penge
Penge is in the London Borough of Bromley, and we cover the whole SE20 area as well as Anerley, Beckenham, Sydenham.
Lamona fridge faults we fix
- Freezing food. A stuck thermostat or sensor can over-cool the fridge.
- Water inside the fridge. A blocked defrost drain at the back wall makes water collect under the salad drawers.
- Water on the floor. The drain hose or evaporation tray at the back may be displaced or cracked.
- Light out but cooling. The bulb or LED module may have failed, or the door switch is stuck.
- Ice on the back wall. Some ice on the back panel is normal, but a thick sheet points to a defrost problem.
Safety first
If the fridge is warmer than 8°C, move food you need to keep to another fridge or a cool box, and decide what to discard following food safety guidance.
Helpful guides
Questions customers ask
Are you a Lamona authorised repairer?
No. We’re an independent repairer, so we can work on Lamona and every other major brand. If your fridge is still under the manufacturer’s guarantee, contact Lamona first.
What do I need for a Lamona fridge repair?
The full model details (the Lamona model code (often starting LAM) and serial number), the fault and any error code, and your postcode in Penge.
What temperature should my fridge be?
Between 0 and 5°C. Use a fridge thermometer on the middle shelf to check.
Other fridge brands in Penge
More Lamona repairs in Penge
Lamona fridge repairs in other areas
Book your repair
Tell us the make, model and what it’s doing. We’ll explain the next step and the cost before any work starts.